Yaesu (UK) Ltd
Visit Yaesu USA Site
USA
Visit Yaesu Japan Site
Japan
Visit Standard Horizon Marine Site
Standard Horizon
Yaesu (UK) Ltd
MD-100A8X Desktop Microphone
Base Station Desktop Dynamic Microphone especially designed for the FT-1000MP and FT-900 transceivers, but also compatible with: FT-747, FT-757GX, FT-840, FT-890, FT-990, and FT-1000.

The MD-100A8X will work with past HF models that include the ROUND 8-pin jack. (some models may not benefit from the scan function)

Note: Do NOT use this microphone on the following: FT-2400H/-7400 series, FT-2500, FT-8500, or others than those listed above. Damage may result from modular jack wiring incompatibility.
Selectable low-cut filtering and high-emphasis active filtering that allow you to tailor the microphone response for optimum voice clarity or DX punch.

Designed for base station operation with the latest Yaesu HF Transceivers

A multi-axis pivoting mount lets you adjust the horizontal and vertical position of the microphone to accomodate various locations and heights, or you can remove the microphone from the base and use it independently (an auxiliary toggling PTT button is provided, but the audio filering and scan controls cannot be used).

The base of the MD-100A8X includes a large push-to-talk (PTT) switch and latching button, along with a large rotary up/down, slow/fast control for scanning.

Jacks and cabling are provided to accomodate transceivers having either RJ-45 or round 8-pin MIC jacks.

Low Cut Switch
The Off position provides flat-audio-characteristic transmit audio~
Position 1 attenuates low audio tones, for improved clarity in moderate band conditions, or if you have a naturally deep voice
Position 2 attenuates low autio dones more than Px 1, for improved clarity in noisy band conditions.

To work contest pileups, the HIGH EMPHASIS filter provides even crispier audio.

Note: This switch is ignored when the HIGH EMPHASIS switch is ON, and when the MAIN switch is set to THRU.
Specifications MD-100A8X
Transducer Type Dynamic
Frequency Response 100 to 5000Hz (-6dB)
Audio Characteristic Controls  
Low Cut Switch    
Off Position   Standard Frequency Response
Position 1   -3dB rolloff from 1000 to 150Hz
Position 2   -3dB rolloff from 1000 to 300Hz
High Emphasis Switch    
On Position   +6dB at 3000Hz
Sensitivity -75 ±3dB @ 1kHz and 500Ω (0dB=1V/0.1Pa)
Controls PTT Switch, PTT Lock Switch
  Scanning Control (only for specific transceivers)
Impedance 500Ω
Dimensions  
Base (W x H x D, mm) 112 x 156 x 151 (w/o microphone)
Microphone 42.5mm dia x 189mm
Weight (approx, g) 670 (w/o cable)
  • MD-100A8X Microphone
  •  
There is no product that matches the search criteria.
 
© 2017 Yaesu (UK) Ltd. Website by KBComms.