Yaesu (UK) Ltd
Visit Yaesu USA Site
USA
Visit Yaesu Japan Site
Japan
Visit Standard Horizon Marine Site
Standard Horizon
FTDX-5000MP Premium HF/50MHz Transceiver
FTDX-5000MP Premium HF/50MHz Transceiver
The Yaesu FT DX 5000MP Premium HF/50 MHz 200W Transceiver Series

The FT DX 5000 Series HF/50 MHz 200 Watt Transceivers are a new Premium Class of Yaesu radios with two Independent Receivers plus many unique options and accessories designed to meet the Performance Requirements of even the most demanding serious Amateur Radio operator.

NOTE: The FTDX-5000MP can easily be modified to transmit on the 2200m band (136kHz), with a power of around 10mW. (Please contact your local dealer for more information)
FT DX 5000MP Brief Description
SM-5000 Station Monitor – Included; 300 Hz Roofing Filter – Included; ±0.05ppm OCXO – Included.
Rugged 200 Watt Output Power
The FTDX 5000 robust and high-power Final Amplifier Stage incorporates two super reliable FET, VRF-150 (Drain-Source Voltage 170 V/Gate Source Voltage ±40 V, Total Device Dissipation 300 W) in a push-pull configuration, offers solid 200 W output (75 W Class A operation).
Internal Power Supply
All  FTDX 5000 radios have their own built-in power supply
TWO Totally Independent Receivers
All FTDX 5000 Transceivers include Two (2) Totally Independent Receivers to give you Performance and Flexibility previously only provided by much more expensive radios.
SUPERB 3rd-Order Dynamic Range & 3rd-Order Intercept Point (IP3)
SSB (2.4kHz BW)
10 kHz SEP.:106 dB, IP3 +40 dBm 
CW (500Hz BW)
10 kHz SEP:112 dB, IP3 +40 dBm
2 kHz SEP. :105 dB, IP3 +36 dBm
1 kHz SEP. : 99 dB, IP3 +25 dBm
*VFO-A/Main Receiver @ 14 MHz, IPO1
Super Sharp “Roofing” Filters
Super sharp “Roofing” filters for VFO-A/Main Receiver.
Filters are Selectable between *300 Hz, 600 Hz, 3 kHz (6-pole crystal filter), 6 kHz, 15 kHz (4-pole MCF)
*300 Hz filte included in the FTDX 5000MP
High Performance Yaesu Custom-designed 32-bit Floating Point DSP
The legendary high performance Yaesu Custom-designed 32-bit Floating Point DSP based on the TI TMS320C6727B (@300 MHz), one EACH for VFO-A and VFO-B.
Variable CW Audio Peak Filter & High/Low-Cut Filtering
Variable CW Audio Peak Filter, and High/Low-Cut filtering created through the very latest in DSP technology. 
- CW Width: 50/100/150/200/250/300/350/400/450/500 Hz 
- CW Pitch Frequency: 300~1050 Hz (10 Hz Steps)
True Analog Meter Precision
Enjoy the same Huge Size Metering System as the FT DX 9000 with True Analog Precision and Instant Reaction Time.
New Function Displays for Ease of Operation
Three Electro Luminescence clear Displays included for easier operation and control of the Sub-Frequency, Graphical Wave and Menu function.
IF Output Available
IF Output (9 MHz) from VFO-A/Main Receiver
Practical Level Indication System for Most Important Settings
The FTDX 5000 provides loads of practical Level Indication that clearly show settings of Mic-Gain / RF Power / CW-Pitch / Keyer Speed / Processor Level / VOX Delay Time / Break-In Delay Time.
-They can be controlled ON/OFF independently!
Introducing the SM-5000 Station Monitor Bandscope
If you need a good Bandscope to enhance your operations, you are going to love our all-new SM-5000 matching station monitor. Included with the Bandscope is a complete, enhanced stereo speaker system with superb audio quality - the speakers are point at you instead of up into the air above the radio!
Other Valuable Options
- Yaesu Data Management Unit DMU-2000, and utilize its powerful Audio Scope, Oscilloscope, Spectrum Scope, logging, and Rotator Control capabilities using your own personally selected and purchased computer display monitor.
- Yaesu External Fully-Automatic Micro-Tuning Units. Three modes available: A (160 m Band), B (80 & 40 m Bands), C (30 & 20 m Bands)

Specifications

FT DX 5000 MP Transceiver

GENERAL   
Rx Frequency Range  30 kHz - 60 MHz (Operating) 
  1.8 - 29.7 MHz, 50 - 54 MHz (Specified performance, Amateur Bands only) 
Tx Frequency Range 1.8 - 29.7 MHz, 50 - 54 MHz (Amateur Bands only)
Frequency Stability  ±0.05ppm (MP version, after 1 minute @ -10ºC to +60ºC) 
  ±0.5ppm after 1 minute @ -10ºC to +60ºC  
Operating Temperature Range  -10ºC to +60ºC 
Emission Modes  A1A (CW), A3E (AM), J3E (LSB,USB), F3E (FM), F1B (RTTY),
  F1D (Packet), F2D (Packet) 
Frequency Steps  1/5/10Hz (SSB, CW, AM), 100Hz (FM) 
Antenna Impedance 50Ω, unbalanced 
  16.7Ω - 150Ω, unbalanced (Tuner ON, 1.8 - 29.7 MHz Amateur Band) 
  25Ω - 100Ω, unbalanced (Tuner ON, 50 MHz Amateur Band) 
Power Consumption  Rx (no signal)          70VA 
(approximate figures)  Rx (signal present)   80VA 
  Tx (200W)              720VA 
Supply Voltage  AC 90V - 264V 
Dimensions (W x H x D, mm)  462 x 135 x 389 (w/o knob and connector) 
Weight (approx, kg)  21 
TRANSMITTER  
Power Output  10 - 200 Watts (CW, LSB, USB, FM, RTTY, PKT) 
  5 - 50 Watts (AM carrier) 
  10 - 75 Watts (Class A: LSB, USB) 
Modulation Types  J3E (SSB): Balanced 
  A3E (AM): Low-Level (Early Stage) 
  F3E (FM): Variable Reactance 
Harmonic FM Deviation  ±5.0kHz/±2.5kHz 
Harmonic Radiation  Better than -60dB (1.8 - 50 MHz Amateur bands) 
SSB Carrier Suppression  At least 60dB below peak output 
Undesired Sideband Suppr.  At least 60dB below peak output  
Audio Response (SSB)  Not more than -6dB from 300 to 2700 Hz 
3rd Order IMD  -31dB @ 14 MHz, 100 Watts PEP 
  -40dB @ 14 MHz, Class A: 75 Watts PEP 
Bandwidth  500 Hz (CW) 
  3.0 kHz (LSB,USB) 
  6.0 kHz (AM) 
  16 kHz (FM) 
Microphone Impedance  600Ω (200 to 10kΩ) 
RECEIVER   
Circuit Type  VFO-A; Double-Conversion Superheterodyne 
  VFO-B: Triple-Conversion Superheterodyne 
Intermediate Frequencies  VFO-A; 9 MHz / 30 kHz (24 kHz for AM/FM) 
  VFO-B; 40.455 MHz /  455 kHz / 30 kHz (24 MHz for AM/FM)
Sensitivity  SSB (2.4 kHz, 10dB S+N/N) 
            2µV (0.5 - 1.8 MHz, IPO1) 
          0.2µV (1.8 - 30 MHz, AMP2)
          0.125µV (50 - 54 MHz, AMP2)
  AM  (6 kHz, 10dB S+N/N, 30% modulation @ 400 Hz) 
            6µV (0.5 0 1.8 MHz, IPO1)
            2µV (1.8 - 30 MHz, AMP2) 
            1µV 50 - 54 MHz, AMP2)
  FM   (BW: 15 kHz, 12 dB SINAD)  
          0.5 µV (28 - 30 MHz, AMP2)
          0.35 µV (50 - 54 MHz, AMP2) 
  * There are no specifications in frequency ranges not listed * 
Squelch Sensitivity (AMP2)  SSB / CW / AM 
          2µV (0.1 - 30 MHz) 
          2µV (50 - 54 MHz) 
  FM 
          1µV (28 - 30 MHz) 
          1µV (50 - 54 MHz) 
  * There are no specifications in frequency ranges not listed * 
Selectivity (-6 / -60dB)  Mode                   -6db                            -60dB 
  CW              0.5kHz or better         750Hz or less
  LSB,USB    2.4kHz or better         3.6kHz or less 
  AM                   6kHz or better          15kHz or less 
  FM                 12kHz or better          30kHz or less 
Image Rejection  70dB or better (1.8 - 29.7 MHz Amateur bands, VRF: ON) 
  60dB or better (50 MHz Amateur band) 
Maximum Audio Output  2.5W into 4Ω with 10% THD 
Audio Output Impedance  4 to 8Ω (4Ω: Nominal) 
Conducted Radiation  Less than 4000 µµW 
 

 
  Specifications are subject to change, in the interest of technical
improvement, without notice or obligation, and are guaranteed
only within the Amateur Bands. 

  • FT DX 5000 MP Transceiver
  • MH-31B8 Hand Microphone
  • FH-2 Remote Control Keypad
  • AC Power Cord
  • 4-pin DIN Plug
  • 5-pin DIN Plug
  • 1/4" 3-contact Plug
  • 3.5mm 3-contact Plug
  • 3.5mm 2-contact Plug
  • RCA Plug
  • Operating Manual
  • Warranty Card
Finished Programs
Manuals
Click to download FT-DX5000 CAT OM (FTDX5000_CAT_OM_EH036H120.pdf 255 Kb)
 CAT Operating Manual for the FT-DX5000
Programs
Click to download Early Spring Sales (2017-02 (Early Spring Sales)_EN.pdf 349 Kb)
 A New Cashback Program from Yaesu Musen Co.Ltd valid from 15th February 2017 to 30th April 2017 for new product purchases for EU customers only. Terms and Conditions apply. See Cashback form for details and General Terms and Conditions V11.1 July 2016
 
© 2017 Yaesu (UK) Ltd. Website by KBComms.