Yaesu (UK) Ltd
Visit Yaesu USA Site
USA
Visit Yaesu Japan Site
Japan
Visit Standard Horizon Marine Site
Standard Horizon
Yaesu (UK) Ltd
FT-1900E-B2 55W VHF FM Mobile Transceiver
ULTRA RUGGED 55-WATT 144 MHz MOBILE

The FT-1900E is a ruggedly-built, high-performance 55-Watt 144 MHz mobile FM transceiver with outstanding receiver performance and crisp, clean audio. Optimized for ease of operation day or night, the FT-1900E is one tough radio for operating in a tough world!

55 Watts of Power Output
The FT-1900E provides a hefty 55 Watts of power output, with "low power" settings of 5, 10 and 25 Watts, for situations where full power is not required.
Large LCD Display
The large 6 digit backlit LCD on the FT-1900E ensure excellent visibility
Loud Audio with Internal Speaker
The FT-1900E packs 3W BIG watts of Loud Audio with its own Internal Speaker for those noisy environments.
Extended Receiver Coverage
The FT-1900E provides receiver coverage of 136-174 MHz, so you can listen in on a wide variety of commercial, military, public safety, and marine communications.
Illuminated Microphone with Keyboard Frequency Entry
The supplied MH-48A6J DTMF Microphone is illuminated for ease of nighttime use, and you may enter operating frequencies directly from the keypad. What's more, memory channels may also be recalled directly via the keypad.
200 Memory channels with Alpha-numeric Labeling
The FT-1900E's extensive memory system includes 200 regular memories, ten pairs of band-limit memories, 8 memory banks, and a one-touch "Home" channel. Memory channels store repeater offset information, as well as CTCSS or DCS data, and can have a six-character label appended, for quick channel recognition. And the memories may be allocated into as many as eight memory banks, for more efficient scanning.
Programmable
Four user-programmable "soft" keys are provided on the MH-48A6J microphone, allowing you to bring often-used Menu items, or front panel key functions, to your fingertips.
Built-in CTCSS and DCS Encoder/Decoder Circuits
The FT-1900E includes both CTCSS and DCS Encoder/Decoder circuitry, with Reverse CTCSS Decoding also available, to mute your receiver when a particular tone is received (instead of opening your squelch). And you can encode CTCSS and decode DCS, or vice versa, too, if your application requires it.
Adjustable Mic Gain and Wide/Narrow Deviation and RX Bandwidth
The microphone gain for the FT-1900E's transmitter is adjustable, so you can optimize it for your voice level as well as background noise in your operating location. And for operation in crowded channel environments, the TX deviation and RX bandwidth may both be reduced via the Menu.
Automatic Repeater Shift (ARS), Automatic Power-Off (APO), and BCLO (Busy Channel Lock-Out)
ARS: Automatically selects the typical repeater shift used in your country, based on the current operating frequency.
APO: Automatically turns power off after a user-defined time period, to prevent you from running down your car battery if you forget to turn your rig off.
BCLO: Prevents you from transmitting on an occupied frequency (especially valuable during Tone Squelch or DCS operation).
CW Trainer
You can practice your Morse Code recognition, using this novel trainer that sends you five-character code groups, with variable speed and instant feedback as to the correct characters sent to you.
Security Password to Prevent Unauthorized Use
A defeatable (by the owner) Security Password system is provided for the FT-1900E, so you can limit operational access to yourself and any other users (if any) informed of the password for the transceiver.
Easy Access to YAESU's Renowned WiRES-II™ Internet Linking Nodes
A front panel key provides instant access to WiRES-II nodes. More information about WiRES, Yaesu's exciting and fun way to communicate via Amateur Radio AND the Internet, may be found at the WiRES-II Web site: http://www.vxstd.com/en/wiresinfo-en .
Note: Specifications subject to change without notice or obligation. Specifications guaranteed only within Amateur Band. Frequency ranges will vary according to transceiver version;check with your dealer.

Specifications

FT-1900E-B2

GENERAL  
Frequency Range  

RX

136.000 - 174.000 MHz

TX

144.000 - 146.000 MHz
Channel Steps 5/10/12.5/15/20/25/50/100 kHz
Standard Repeater Shift ±600 kHz
Modes of Emission F2D, F3E
Antenna Impedance 50Ω, Unbalanced
Frequency Stability Better than ±10ppm @ -20ºC to +60ºC
Operating Temperature Range -20ºC to +60ºC
Supply Voltage 13.8 VDC (±15%), negative ground
Current Consumption (typical) RX: less than 0.7A, less than 0.3A (Squelched)
  TX: 11A (55w), 7A (25W), 5A (10W), 4A (5W)
Case Size (W x H x D, mm) 140 x 40 x 146 (w/o knobs)
Weight (approx.) 1.2 kg
TRANSMITTER  
Output Power 5/10/25/55 W
Modulation Type  Variable Reactance 
Maximum Deviation  ±5 kHz (Wide)
  ± 2.5 kHz (Narrow)
Spurious Radiation  Better than -60dB 
Microphone Impedance  2 kΩ 
RECEIVER   
Circuit Type Double-conversion superheterodyne 
Intermediate Frequencies  21.7 MHz & 450 kHz
   
Sensitivity (for 12dB SINAD) Better than 0.2 µV
Selectivity (-6db / -60dB) 12 kHz / 28 kHz (Wide)
  9 kHz / 22 kHz (Narrow)
IF Rejection Better than 70dB
Image Rejection Better than 70dB
Maximum AF Output

3W into 4Ω @ 10% THD


 
  • FT-1900 Transceiver
  • MH-48A6J DTMF Microphone
  • MMB-36 Mobile Bracket
  • DC Power Cord w/Fuse
  • Spare Fuse (32V/15A)
  • Operating Manual
  • Warranty Card
Manuals
Click to download FT-1900E OM (FT-1900E_OM_CE_EH023N210.pdf 2.1 Mb)
 Operating Manual for the FT-1900E
 
MLS-100 High-Power External Speaker
 
 MLS-100 High-Power External Speaker 
 
FP-1030A Regulated Linear DC Power Supply
 
 FP-1030A Regulated Linear DC Power Supply 
Showing 1 to 2 (of 2 products) Result Pages:  1 
 
© 2017 Yaesu (UK) Ltd. Website by KBComms.