Yaesu (UK) Ltd
Visit Yaesu USA Site
USA
Visit Yaesu Japan Site
Japan
Visit Standard Horizon Marine Site
Standard Horizon
Yaesu (UK) Ltd
DR-1XE 2M/70CMS Dual Band 50W Digital Repeater

The YAESU DR-1E is a digital and conventional FM dual mode repeater that covers the VHF and UHF amateur radio band. It was developed for use with System Fusion and conventional FM in mind.
Replacing your existing analogue FM repeater with a Yaesu DR-1E provides contining use of Analogue FM whilst integrating the use of digital communications functions through its unique AMS capabilities.
Extensive use is made of modern touch screen technology using a 3.5" Full Colour Screen for configuration and monitoring of the DR-1E repeater.Front Panel Microphone socket & Front facing Loudspeaker with volume control allows the DR-1E to be used as a base station or for transmitter testing. All connection on the rear panel including DB15 I/O connector for interfacing to external Repeater controller if required. An external DC 13.8V 20A power Supply is required.

Easy Migration
The Repeater controller, Receiver , Transmitter are all packaged into standard 2U 19" Rack panel for easy replacment of an existing repeater. All the ancillary equipment like Cavity Filters, Duplexers, Amplifiers, Backup Battery supply can all be used in the new installation.

DX1E Features
Modulation modes: Conventional FM, 12.5KHz C4FM Digital ( V/D Mode, VFR Mode, DFR Mode).
V/D mode: Voice and Data shared. VFR Mode: Voice Full Rate, DFR mode: Digital Full Rate.

AMS Mode:
Automatic Mode Selection function automatically recognises the incoming C4FM signal or conventional FM and then retransmits the signal using the preset communications mode.

Touch Screen
3.5" Colour Touch Screen for full configuration of the DR-1E Repeater

High TX Output Power
Extremely Reliable, Selectable between 50W/ 20W / 10W.

Emergency Operation
Supports autoswitched back battery power operation.

Front Panel Microphone connector
local BASE station operation and transmitter testing.

Full size front facing speaker
with front panel volume control for local monitoring.
Full integration with existing external Repeater controllers using the rear panel DB-15 I/O Connector.

Touch Panel Operation
Enjoy the ease of using the DR-1E 3.5" Full Colour Touch Panel operation for both setting up and monitoring operation

Other features:
19" Rack mount kit available
High Stability ±2.5ppm TCXO included.
DSQ ( Digital Squelch Code) signalling feature
CTCSS and DCS signalling features
ID announcement feature
Remote Controller interface
Base Station operation
Programmable TimeOut Timer
Firmware updates.

The Repeater controller, Receiver , Transmitter are all packaged into standard 2U 19" Rack panel for easy replacment of  an existing repeater. All the ancillary equipment like Cavity Filters, Duplexers, Amplifiers, Backup Battery supply can all   be used in the new installation.
DX1E Features
  Modulation modes: Conventional FM, 12.5KHz C4FM Digital ( V/D Mode, VFR Mode, DFR Mode).
  V/D mode: Voice and Data shared. VFR Mode: Voice Full Rate, DFR mode: Digital Full Rate. 
AMS Mode:
  Automatic Mode Selection function automatically recognises the incoming C4FM signal or conventional FM and then   retransmits the signal using the preset communications mode. 
Touch Screen 
  3.5" Colour Touch Screen for full configuration of the DR-1E Repeater
High TX Output Power 
 Extremely Reliable, Selectable between 50W/ 20W / 10W.
Emergency Operation
 Supports autoswitched back battery power operation.
Front Panel Microphone connector
 local BASE station operation and transmitter testing.
Full size front facing speaker
  with front panel volume control for local monitoring.
Full integration with existing external Repeater controllers using the rear panel DB-15 I/O Connector.
Touch Panel Operation 
Enjoy the ease of using the DR-1E 3.5" Full Colour Touch Panel operation for both setting up and monitoring operation
Other features:
 19" Rack mount kit available
 High Stability ±2.5ppm TCXO included.
 DSQ ( Digital Squelch Code) signalling feature
 CTCSS and DCS signalling features
 ID announcement feature
 Remote Controller interface 
 Base Station operation
 Programmable TimeOut Timer
 Firmware updates. 
Technical Specifications

 

GENERAL

DR-1E

Frequency Range 144 -148 MHz and 430 - 450 MHz
Channel Steps 5, 6.25 KHz

Emission Types F1D,F2D,F3E,F7W
Frequency Stability ±2.5 ppm [ -20°C ~ +60°C)
Aerial Impedeance 50Ω
Channel Steps 5/6.25/8.33/9/10/12.5/15/20/25/50/100 KHz
Emission Type F1D, F2A, F2D,F3E,A3E
Frequency Stability ±5 ppm ( -10oC to +60oC)
Aerial Impedance 50 Ω
Supply Voltage DC 11.7V to 15.8V -ve Ground
Current Consumption Receive  1.5A
  Transmit 13A TX 144MHZ Band
  Transmit 14A TX 430MHz Band
Operating Temperature Range -20°C ~ +60°C [ -4°F ~ +140°F]
Case Size (W x H x D, mm) 19"W x 3.5"H x 15"D 
Weight (Approx, g) 22.05lbs (10kg) 
TRANSMITTER  
RF Power output 50 / 20/ 10W
Modulation Type F1D, F2D,F3E, F7W

  F3E Variable Reactance Modulation, F7W 4FSK ( C4FM)
Spurious Emissions At least 60dB below
RECEIVER  
Circuit type Double Conversion Superhetrodyne
Intermediate Frequency 1st IF 47.25MHz; 2nd IF 450KHz
Receiver Sensitivity 0.3μV (Digital 2m/70cms) BER 1%

0.2μV (FM 2m/70cm) 12dB SINAD
Adjacent Channel Selectivity Better than 65dB TYP (20KHz offset)
                           Selectivity FM 12.5KHz/35KHz ( -6dB/-60dB)
                     Intermodulation Better than 65db TYP ( 20/40KHz offset)

Audio output 4W (4Ω, THD 10% 13.8V DC Internal Speaker

Specifications are subject to change without notice and
are only guaranteed in the 2M & 70cms Amateur Bands.

  • DC Cable
  • PC Connection cable SCU-20
  • Rubber Feet (4)
  • Operating Manual
  • Certificate of Compliance DoC
  • Warranty Card
Manuals
There is no product that matches the search criteria.
 
© 2017 Yaesu (UK) Ltd. Website by KBComms.